1. Mike applies paste grain filler (Lawrence-McFadden Grain Filler) to the entire uke, wipes the excess off with a square of T-shirt material and then exposes the uke to a strong UV light for about 30-60 seconds to cure.
2. He then scuff sands the whole thing (except the soundhole) with an orbital sander with 320 grit sandpaper. The soundhole is also scuff sanded but with a hand sanding block.
3. Mike then sprays the uke with a UV cured polyurethane spraying lacquer. He sprays 3 coats with a ½ an hour in between coats.
2. He then scuff sands the whole thing (except the soundhole) with an orbital sander with 320 grit sandpaper. The soundhole is also scuff sanded but with a hand sanding block.
3. Mike then sprays the uke with a UV cured polyurethane spraying lacquer. He sprays 3 coats with a ½ an hour in between coats.
No comments:
Post a Comment